User manual

得伯乐科技有限公司
DBL Technology Limited GoIP User Manual
Web: www.dbltek.com
Tel: [phone]
3.5.1.2 Gatekeeper
Under the Gatekeeper mode, the GoIP operates in the H.323 register status. When you register
through the H.323 protocol, select “H.323 Terminal” in “Terminal Type”, as shown in the above
figure. The registration mode involves the Gatekeeper and direct connection (the direct connection
mode is used for calls over the IP address). When all lines use one number, select the single server
setting mode. When all lines use different numbers, select the line setting mode. When you select the
line setting mode, each line can be registered to different servers. The setting parameters are as
follows:
A. H.323 Telephone Number
The value of this parameter is a decimal numeral string that is used to confirm the telephone
number in the telephony network. For example, 191 is a valid telephone number. Enter the telephone
number in this parameter.
B. Gateway Prefix
When you register through the gateway prefix, enter the prefix number. When the prefix number
is called, a dialing tone is heard and then the secondary dialing is required. The gateway prefix
enables the one-stage dialing. When users dial the gateway prefix and the telephone number, the
gateway will automatically dial the number without the prefix. For example, the current gateway
prefix is 123. If a user calls 075588290211, the user dials 123075588290211 on the IP phone.
B. Display Name