User manual

得伯乐科技有限公司
DBL Technology Limited GoIP User Manual
Web: www.dbltek.com
Tel: [phone]
are on the right, as shown in the above figure.
You can also access the setting page of the GoIP through the IP address 192.168.2.216 or
192.168.2.172 of the LAN port of the gateway. The login method is the same as that of the PC port,
but you must first obtain the IP address of the LAN port.
3.2 Status
The status page contains the following contents, as shown in the above figure:
3.2.1 Telephone Information
A. Product Sequence Number
Each GoIP gateway has a factory set sequence number, such as GOIP08030031, which is used for
centralized setting, technical support, and maintenance filing. The sequence number is printed on the
bottom plate of the gateway and is read-only.
B. Software Version
It displays the current version of software used by the GoIP. When you want to upgrade the
software, make sure the update version is newer than the current version.
C. Hardware Version
It displays the current hardware version of the gateway.
D. Line Register Status
It displays the login status of the line. When the line has logged into the SIP server or H.323
Gatekeeper, LOGIN is displayed, otherwise, LOGOUT is displayed.
E. Line Use Status
It displays the use status of the line. When the line is in use, the status is ACTIVE, when the line
is idle, the status is IDLE.
3.2.2 Network Information
A. LAN Port
It displays the current IP address of the LAN port, such as 192.168.2.172.
B. PC Port