User manual

得伯乐科技有限公司
DBL Technology Limited GoIP User Manual
Web: www.dbltek.com
Tel: [phone]
III. Page Setting
Before setting the page, you need to have the IP address of the PC port of the gateway first.
Connect the computer for setting the gateway to the PC port of the GoIP. The GoIP gateway has a
built-in page server that is used to accept or obtain the HTTP. You can set the related functions for the
GoIP through the Internet Explorer.
3.1 Page Setting Menu
You can access the setting page of the GoIP gateway through the IP address of the LAN port or
PC port. The default factory settings are as follows:
A: The LAN port supports the DHCP (dynamic IP address). Users can dial the SIM card number
of the gateway and if connected dial *00 to obtain the IP address.
B: The default IP address and mask of the PC port are 192.168.8.1 and 255.255.255.0
respectively.
Enable the DHCP service of the PC port.
Connect the computer with the PC port of the gateway through the IP address of the PC port, and
set the IP of the computer to dynamic IP or fixed IP as 192.168.8.xxx and the default gateway as
192.168.8.1.
Open the Internet Explorer and enter 192.168.8.1 or http://192.168.8.1 in the address bar, then,
the login page is popped up for password input. Enter the login account (“admin” as default) in the
User Name, and password (“admin” as default) in the Password field.