User manual

得伯乐科技有限公司
DBL Technology Limited RoIP-102 User Manual
Web: www.dbltek.com
Tel: [phone]
vi. Main Unit Setup
Connect the Channel Port to a Radio Channel via the PPT Adapter Cabel
provided.Up to 1 channel is supported.
Connect the WAN Port to a router,network switch,ADSL/Cabel Modem for access
an external network or the public network.
Connect the Switch Port to an external system fro remote control.It can be used to
switch on and off a Public Announce (PA) system to instant broadcast.If the relay
switch is connected to high voltage load.The maximum rating for the internal relay is
240VAC and 500 mA load current.
Connect the LAN Port to a local PC or a local Ethernet network(LAN).This allows
sharing the external network connected to the WAN Port with the local
network.However,the shared network is intended for configuration the device and is
best not used for high data traffics applications in order for the device to insure the
best voice quality.