User manual

得伯乐科技有限公司
DBL Technology Limited RoIP-102 User Manual
Web: www.dbltek.com
Tel: [phone]
When registered successful after start up,the terminal will automatically calls the number
corresponding to a connection.
iv. PTT Settings：
PTT setting is to determine each PPT input and output Active level RMS value.PTT settings
determine each of the input and output RMS level,set “0” represents the effective interface potential
efficient PTT is low,is set to “1” indicates that the PTT interface is high potential effect.For
different types of radio stations require accurate selection.
PTT Output Expiry (second) is to protect the station will launch as a means for long,press the
specific needs of the setting
v. Recorder Settings
Redorder Setting is set for each group recording audio server address need to recording,refer to
the recording software instructions.
vi. Broadcasting Settings
Broadcasting Settings is actually seeting the password for Radio remote switch,when the switch
is opened and not receiving the turn off password,then the Radio by the length of time to decide
when to switch off automatically(time in seconds).
Remote switch can only be control by a member of a group,so please select the which group is
radio remote switch belonged to.