User manual

得伯乐科技有限公司
DBL Technology Limited RoIP-102 User Manual
Web: www.dbltek.com
Tel: +86 755 8829 0211
VI. Device Configuration Via Built-in Web Server
The built-in web server provides a comprehensive way to fully program the device manually
i. Web Server Login
There are two methods to access the built-in web server.
Method 1 is to access the built-in web server via the LAN port.Connect a computer to the LAN
port of the RoIP102 and configure its IP to 192.168.8.x(x=2 to 254).Type the IP address 192.168.8.1
in the address field of a web browser.The following login window is then displayed.
Enter the User name and the password now.The user name for the administrative level is
admin and the default password is admin.
Please make sure to click on Save Changesafter configuring the device.
Method 2 is to access the built-in web server via the WAN port.The WAN port is set to DHCP
mode as a default factory setting.When it is first connected to a network with a DHCP host,it
obtains an IP address automatically from the host.In order to listen to the IP obtained,make a call to
the PSTN number.Once the call is answered,the device plays a voice prompt to ask for
password.Dial *00 and the device then reads out the WAN port IP address.
Enter this IP in the address field of a web browser to get a login window as described in
Method 1.
ii. Network settings:
The network settings determine the works normal and stable of RoIP102.The network