User manual

得伯乐科技有限公司
DBL Technology Limited RoIP-102 User Manual
Web: www.dbltek.com
Tel: +86 755 8829 0211
V. Default Factory Settings
The table below shows the factory default settings.There are two way to reset to the factory
default settings:
i. Press the RESET switch for more than 15 seconds.
ii. In the Configuration paga,select Tools and then Reset Config.
Item
Factory Default Settings
Range
Login ID
admin
Login Password
admin
Programmable(16
characters in the ASCII
table)
WAN Port Setting
DHCP
LAN Port Setting
192.168.8.1
PTT State
0is active
0 is active low
1 is active high
PTT maximum duration
60 seconds
Less than 600 seconds
Jitter Delay
60 milliseconds
20-220 milliseconds