User's Manual

Dbii Ltd, 16F-3, 482 Zhongxiao East Rd, Sec 5, Taipei 11083 Taiwan
Email: [e-mail] Ph: +886.2.2346.3318, Fax: [phone]
www.dbii.com
5725-5850 MHz U-NII operations
Maximum transmitter settings for fixed point-to-multi-point operation
installation
Antenna Model Gain
(dBi)
Channel
Width(MHz)
Software Max
Power Setting
Actual Max Tx
Power
Dipole USI05-
220170/2.5/5dBi
5 5,10,20 22 27
Omni 65812 ODN 12 5,10,20 22 27
Sector MA-WB55-20 20 5,10,20 22 27
Panel MA-WA55-30 30 5,10,20 15 20
Dish PX3F-52-N7 33.5 5,10,20 11
16
FCC Caution
To assure continued compliance, any changes, or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this equipment.
FCC Radiation Exposure Statement
To comply with FCC RF exposure requirements in section 1.1307, a minimum separation
distance of 3.9 feet is required between the antenna and all occupational persons, and a
minimum separation distance of 8.7 feet is required between the antenna and all public persons.
IC Transmit Antennas
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of
a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To
reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary
for successful communication.
This radio transmitter (identify the device by certification number, or model number if
Category II) has been approved by Industry Canada to operate with the antenna types listed
below with the maximum permissible gain and required antenna impedance for each antenna