User's Manual

Dbii Networks, Inc. 201 Oak Ave, #D, Carlsbad, CA 92008 Ph:760-536-8036 Fax: [phone]
Antenna Installation
WARNING: It is installer’s responsibility to ensure that when using the authorized antennas in
the United States (or where FCC rules apply); only those antennas certified with the product are
used. The use of any antenna other than those certified with the product is expressly forbidden in
accordance to FCC rules CFR47 part 15.204. The installer should configure the output power
level of antennas, according to country regulations and per antenna type. Professional
installation is required of equipment with connectors to ensure compliance with health and safety
issues.
Antenna Compliance
The F20 radio module has been tested and certified with the following antennas:
2.4GHz
Type Model Gain (dBi) Power EIRP Operation Mode
Grid HyperGain HG2424G 24 24 48 PTP
Panel ARC-IA2419B02 19 25 44 PTP
Omni Hwayaotek OA-2450-12 12 24 36 PTMP
Any antenna of same make and lower gain than those listed above may be used in compliance
with certification.
The maximum EIRP limits are listed above with given antennas. In order to use above antennas,
transmitter power settings may need to be adjusted in software to meet given EIRP limits.