User Manual

16
Figure 18 - Donning Cross-over Style Harness
Step 1 Step 2
Step 3 Step 4 Step 5
Figure 19A - Cross-over Style Harness Buckle Connections Figure 19B - Revolver Torso Adjuster
Tongue Buckle: Pass webbing
through buckle and insert tongue
through grommet.
Pass Buckle: Pass male buckle
through female buckle and pull
free end of webbing to tighten.
Quick Connect Buckle: Insert the tab of
the buckle into the receptor of the quick
connect buckle until a click is heard.
To Tighten: Turn Ratchet Knob
in direction A.
To Loosen: Pull Ratchet
Knob out and turn in
direction B.
NOTE: After adjustment, tug
upwards on the shoulder straps
to ensure that each adjustor is
locked in place.
Left
A
B