User Manual


DVA MINI G2 Code 420120326 REV.1.0
English
INPUT, OUTPUT AND CONTROL SECTION
SERVICE DATA USB PORT
This standard USB Type-B port enables user to update product
rmware using a PC and USB BURNER MANAGER. More details are
available at http://www.dbtechnologies.com under “DOWNLOADS”
and in section FIRMWARE UPDATES.
1. AUDIO INPUT AND OUTPUT LINK (BALANCED)
Balanced XLR connector that allows connecting
a line INPUT. A similar type of connector is used
to link the output signal to a second module
(OUTPUT LINK)
5. STATUS LED Main
LEDs show monitor status indications at a glance,
according to the logic summarised in the table
below:
Input
USB Data
Service
Data In
Data Out
ON
Limiter
Signal
Status
Output
Link
Balanced Audio
RDNet
Link
Active
Remote
Preset
Active
DESIGNED & DEVELOPED IN ITALY
USER /
FRONT
SERVICE
FILL
HF2
HF2
HF1 HF1
HF3
HF3
DSP Preset
6 boxes
more than
6 boxes
up to
P
P
U
U
S
S
H
H
P
P
U
U
S
S
H
H
P
P
U
U
S
S
H
H
1
2
3
4
5
2. DSP PRESET
It allows setting the necessary optimisation of
high frequencies in line arrays depending on the
distance and number of modules.
3. RDNet DATA IN and RDNet DATA OUT
RDNet data input and output compatible with
network cables tted with etherCON/RJ45 type
connectors.
“Data in” must be connected to devices such as
RDNet Control 2 or Control 8.
“Data Out” is used to link the network to other
loudspeakers in daisy-chain conguration.
4. RDNet CONTROL LEDs
LEDs relating to module network operation
(RDNet).
In particular, if "Link" is on the RDNet network
is active and has acknowledged the device,
if "Active" is ashing there is data trafc, if
"Remote Preset Active" is on all local control on
the amplier panel are by-passed by the RDNet
remote control.