LIMITED WARRANTY DB DRIVE warrants any products purchased in the USA: from: an authorized DB DRIVE dealer. All products are warranted ta be. free from‘defects in material and workmanship under normal use and service for a period of (1) year when the unit installed by an authorized DB DRIVE dealer. Non-authorized dealer installed products carry a {1} year parts and labor limited warranty. This warranty applies to the orig: nal purchase only.
INTRODUCTION Congratulations: on your purchase of a DB Drive state-of-the-art power amplifier: Your: selection ‘ofa DB Drive car audio product indicates a true appreciation of fine musical reproduction; Whether adding to an existing system or including your DB Drive amplifier in a new system, you are certain to notice immediate performance benefits. KEEP YOUR SALES RECEIPT ‘Take this time to attach your sales receipt fo. the manual and Putin a safe place.
FEATURES AND BENEFITS DC Offset Protection This circuit protects the output of the amplifier against DC voltage. If for some reason DC voltage Is detected at the output stage, the amplifier will shut down protecting the speakers from direct current. Short Circuit Protection The circuit protects the amplifier from damage due to a: short found: in the: speakers or Wiring. If one of the speakers or its Wiring comes Ii contact with ground, the amplifier will shut down.
MOUNTING LOCATION Before you start the installation, it will be necessary to find a mounting location forth amplifier Find a location in which the amplifier will receive adequate ventilation in: order to dissipate tha heat it develops during operation. Two popular mounting locations are in the trunk or under the seat Select the location in which you wish to mount the amplifier.
SIGNAL CONNECTIONS Connect the RCA output of the head unit (AM/FM cassette player, CD, or DAT] to the RCA input terminals of the amplifier To make these connections, we recommend high quality RCA cables, which are available at your local car audio retailer. Run signal wires away from electrical wire tavern possibility of induced noise from the car's electrical system (i.e. popping noises of engine noise). MONO SIGNAL CONNECTION SIGNAL CONNECTION: 4 Channel Amplifier using 2 pair of RCA inputs.
TROUBLE SHOOTING THE SYSTEM ‘We have put together this rototiller-shosting guide if you experience problems after: installing the keep in mind that the majority of problems incurred are caused by improper installation and net the equipment itself. In addition; thees are many components in the system that could cause various signal problems such as inducted electrical noise and engine noise. Before you can properly address the problem, you must first find the compensation is causing the problem.
