User manual

32
LVX XM12 Cod. 420120240 REV.1.0
3. USAGE EXAMPLES
• In the monitor conguration, plan installation so as to ensure appropriate
sound coverage, with as few obstacles as possible, and such to avoid the
Larsen effect (audio feedback).
FLOOR-STANDING STAGE MONITOR
USAGE ON TRIPOD STAND
USAGE AS MONITOR FOR LONGER DISTANCES
. Usage as stage audio monitor is quick and easy. Determine oor slope (if any) to
ensure that the monitor will not slide. Check for obstacles in front of the speaker.
Consider the dispersion pattern shown in section SOUND COVERAGE.
A pole mount socket with 35-mm diameter is provided to mount the monitor on
a tripod stand. Ensure that the tripod centre leg is pointing forward to improve
stability. Maximum mounting height (height of monitor’s bottom side above oor)
is 1.4 m.
WARNING!
• In outdoor applications, consider anchoring the speaker to
prevent swinging due to weather or wind.
• Use a suitably sized stand with the central leg pointing forward
to provide appropriate stability.
• Never hand the speaker from the handles.
• The only congurations allowed are those shown in this manual
The monitor has suitable feet that allow it to be placed with the amplier heat-
sink side facing down as shown in the gure. This way, the speaker can be used as
a monitor with greater front coverage on the stage. This particular arrangement
can cause the heat sink to become very hot (hot surface).
WARNING!
• The heat sink of the LVX XM speaker can become very hot. Before
placing the speaker in this mounting conguration, ensure that the
surface it is to be placed on is made from material resistant to high
temperatures and not propagating ame.
English