User manual

31
LVX XM12 Cod. 420120240 REV.1.0
CONNECTING THE OUTPUTS OF MULTIPLE MODULES (audio daisy chain)
LVX XM12 can supply mains power to another monitor up to a maximum current draw of 14 A (3200 W)
when operating at 220-240Vac or up to 11 A (1200 W) when operating at 100-120Vac. To perform this type of
connection, simply connect the supplied power supply cable to the MAINS INPUT (8) of the rst LVX XM12 module
and connect a second (optional) cable with suitable connectors across the MAINS LINK output (9) and the MAINS
INPUT (8) of the next LVX XM12 module in the chain. Several modules can be connected in this manner up to the
maximum current draw allowed that is indicated on the MAINS LINK connector (9) of the rst monitor.
To connect 2 or more speakers to the same audio source in certain installations, you may nd it convenient
to daisy chain the signal from a rst module to the next and so on. First, connect an audio source
to “INPUT” (4) of the rst speaker (for the different “LINE” or “MIC” connection,
please read section INPUT CONNECTIONS). Next, connect a
balanced XLR cable across the “LINK” output (5) of the rst speaker and the “INPUT” (4) of the next speaker.
Repeat this second step to connect additional speakers until achieving the installation that best suits the
specic application.
WARNING!
The maximum current draw allowed indicated in the rating data of LVX XM12 (MAINS LINK) is calculated
based on the maximum current specication of the PowerCON connector. However, this is not a xed
value as it depends on the type of cable (cross-section area and type of plug) used to connect the rst
LVX XM12 module and on the next LINK cables (cross-section area and type of cable) in the chain. Always
check the maximum current (and power) specications and the cross-section areas of the cable leads used
when designing and sizing the sound system, and anyway before connecting several modules in a daisy-
chain connection.
DAISY CHAIN
AUDIO INPUT
English