User manual
Table Of Contents
- 1. INFORMAZIONI GENERALI
- 2. PRIMA ACCENSIONE
- 3. ESEMPI DI UTILIZZO
- 4. AGGIORNAMENTO DEL FIRMWARE
- 5. ACCESSORI
- 6. RISOLUZIONE DEI PROBLEMI
- 7. SPECIFICHE TECNICHE
- 1. GENERAL INFORMATION
- 2. FIRST POWER-UP
- 3. USAGE EXAMPLES
- 4. FIRMWARE UPDATES
- 5. ACCESSORIES
- 6. TROUBLESHOOTING
- 6. SPECIFICATIONS
- COLLEGAMENTO DELLE USCITE FRA PIù MODULI (rilancio dell’alimentazione)
- 1. ALLGEMEINE INFORMATIONEN
- 2. ERSTMALIGES EINSCHALTEN
- 3. INSTALLATIONSBEISPIELE
- 4. AKTUALISIERUNG DER FIRMWARE
- 5. ZUBEHÖR
- 6. PROBLEMLÖSUNG
- 7. TECHNISCHE ANGABEN
- 1. GÉNÉRALITÉS
- 2. PREMIER ALLUMAGE
- 3. EXEMPLES D’UTILISATION
- 4. MISE À JOUR DU MICROLOGICIEL
- 5. ACCESSOIRES
- 6. DÉPANNAGE
- 7. SPÉCIFICATIONS TECHNIQUES
- 1. INFORMACIÓN GENERAL
- 2. PRIMER ENCENDIDO
- 3. EJEMPLOS DE USO
- 4. ACTUALIZACIÓN DEL FIRMWARE
- 5. ACCESSORIOS
- 6. RESOLUCIÓN DE PROBLEMAS
- 7. ESPECIFICACIONES TÉCNICAS
27
LVX XM12 Cod. 420120240 REV.1.0
• Do not use the speaker for long periods of time when the Limiter LED is on or
blinking, as this indicates that the module is operating under exceeding stress
under distortion conditions.
• Use the SERVICE DATA USB port to update product rmware only. Do not connect
any USB devices to the unit to avoid damage or malfunctioning.
WARNING!
• The fuse installed at the factory is rated for operation in the 220-240 V
voltage range. If you need to operate the speaker in the 100-120 V range:
7. MAINS FUSE
Mains protection fuse.
8. AUTO-RANGE MAINS INPUT
POWERCON connector input.
9. “MAINS LINK” POWER OUTPUT
This connector is intended to supply power to a second module.
POWER SUPPLY UNIT SECTION
1. Disconnect all connections, including the power supply connection.
2. Wait 5 minutes.
3. Replace the fuse with the fuse rated for the 100-120 V range, which is included in the
package.
English