User Manual

62
INGENIA IG4T Cod. 420120235 REV. 1.2
OPTIONS MENU
(Enabling/disabling of automatic power-off and choice of the time period)
(ON/OFF and code selection)
1. ON/OFF (select and conrm whether you
wish to enable/disable the password-protection
of settings).
2. PASSWORD (by selecting and conrming this
item you can specify an alphanumeric password,
consisting of up to 6 digits/characters).
1. ON/OFF (select and conrm whether you wish to enable/disable the timed stand-by of
the control panel).
2. PASSWORD (by selecting and conrming this item you can specify a time period after
which the control panels switches to stand-by mode, ranging between 0’:10’’ – 10’:00 and
with a resolution of 10’’).
1. Select and conrm to adjust the OLED display contrast, with an increase in brightness
ranging between 0 and 100% and a resolution of 5%.
1. Select and conrm to restore the factory settings.
1. Select and conrm to display the information about the latest rmware version loaded into
the system.
1. Select and conrm to exit the OPTIONS menu.
SUPERUSER PASSWORD
If you forget the password, use the code: Q2R5D9
to unlock the system.
CONTRAST
RESTORE
INFO
EXIT
PASSWORD
STAND-BY
Options Menu
English