User Manual

55
INGENIA IG4T Cod. 420120235 REV. 1.2
This menu automatically congures the system
according to the number of speakers, to the presence
or absence of a subwoofer, as well as to the location
and inclination of the speakers. It consists of 3 sub-
menus:
The system can detect, through infra-red communication (the communication ports
are installed on the speaker handles and detection is automatic) whether the user is
using one or two IG4T speakers. After accessing this screen:
The menu allows to manually update the conguration of the system in use,
adding or removing one or more subwoofers. If you need to update the number of
connected subwoofers:
1. Turn the rotary encoder selecting Selfcheck System, then conrm the choice by pressing the push rotary
encoder.
2. After a short animation, the system automatically switches to the next menu (SYSTEM STRUCTURE).
3. If this operation doesn’t need to be performed, select and conrm NEXT; if you need to return to the main
screen, select and conrm BACK
1. turn the rotary encoder, select the “subwoofer” item and conrm it
2. select and conrm the number of subwoofers you want to use
3. select and conrm NEXT to switch to the next menu; select and conrm BACK to return to the SYSTEM
CHECK sub-menu
• SYSTEM CHECK
• SYSTEM STRUCTURE
• SYSTEM TYPE
BUILD SYSTEM MENU
SYSTEM CHECK
SYSTEM STRUCTURE
Build System Menu
Sub-menus
English