User Manual

INGENIA IG2T Cod. 420120238 REV. 1.1

ACCESSING THE MENUS

The push rotary encoder (3) allows the user both to perform a selection by turning it and to conrm a selection by

pressing it. These operations allow to navigate the menus and sub-menus available on the OLED display (2). Inside

the menus and sub-menus, turning the encoder to the right or to the left also allows to increase or decrease the

selected values.

The initial screen at switch-off displays the IG2T level and gain. All settings can be protected by a password.

At switch-on, the IG2T display shows the initial screen, indicating the GAIN and the signal level,

simulating a VU METER.

• Once manually performed, the settings remain stored even after the speaker has

been switched off.

• After approximately one minute has elapsed since the last selection or

conrmation, the system returns to the initial screen (IG2T level/gain). The user

can also return to the initial screen from any point, in 2 ways:

3. CONTROL PANEL AND SETTING MENUS

SELECT / DECREASECONFIRM

SELECT / INCREASE

• If the speakers are 2, correctly stacked, the system recognizes them, and you can

control both of them using the rotary of one of them (mirroring OLED).

a. by selecting and conrming, when existing in a sub-menu, the symbol

b. by holding the push rotary encoder pressed for a few seconds

Push rotary encoder use examples

English