User Manual
56
INGENIA IG1T Cod. 420120237 REV. 1.1
The system types available when using the IG1T are 2:
In the “Stacked” conguration an IG1T speaker rests on a stand, or one or 2 speakers rest on a subwoofer (see
chapter INSTALLATION EXAMPLES); in the “Flown” conguration, instead, one or two IG1T speakers are hanging.
After accessing the SYSTEM TYPE menu, then:
This menu allows to save and then recall the system usage congurations.
Even though at switch-off the IG1T retains all the information about the
latest settings, it may be useful to have at one’s disposal, for different
contexts, a previously saved batch of appropriate settings, and to be able
to quickly reload them. To this purpose, IG1T allows to save and rename 5
batches of settings, using the “SAVE” function, and to recall them using the
“RECALL” function. Should you later have to edit the settings stored in one
of the memory slots, you can later overwrite the previously saved slots.
• Stacked
• Flown
• Select and conrm the desired mode, choosing between “Stacked” and “Flown”; select and conrm NEXT
to access the next screen (select and conrm BACK to return to the previous one). Now, if the system has
previously detected the presence of 2 speakers, it will switch to the SYSTEM COVERAGE menu, and if the
presence of a woofer has been selected in the previous SYSTEM STRUCTURE sub-menu, it will then switch to
the SUBWOOFER MATCHING menu; should that not be the case (Speakers 1, Subwoofer 0) the next screen will
be the initial one, and the procedure will end.
SYSTEM TYPE
ATTENTION!
• Never install the speaker directly resting on the ground, but always
use an optional stand (not included in the supply) with a standard pole
having a diameter of 35 mm and a tripod with the central foot forward.
Always check that the installation is actually stable.
SAVE/LOAD SYSTEM MENU
English
Save/Load System Menu