User manual

user manual
EnglishEnglish
9
EnglishEnglish
user manual
10
PROTECTIONS
Front Grille
The speakers’s components in the box are protected by 1.5mm metal steel grille.
Cooling
Thermal control is provided by the internal DSP, by means of one sensor, controls the
temperature of the amplifier, avoiding overheating by limiting the overall volume.
In case of overheating (> 90°C) the volume decreases proportionally to the temperature
increase, making the change unnoticeable.
The correct volume and all the functions are automatically restored when standard
operating temperatures are reached.
LOUDSPEAKER INSTALLATION
WARNING
Make sure that the loudspeaker is securely installed in a stable position to avoid any
injuries or damages to persons or property.
Before hanging the loudspeaker check all the components for damages, deformations,
missing or damaged parts that may compromise safety during installation.
If you use the loudspeakers outdoors avoid places that are exposed to bad weather.
The loudspeaker has the following mounting options:
- bookshelf floor (monitor) (Fig.1-page 23)
- on speaker stands (Fig.2-page 24).
WARNING
Never use the handle to hang the speaker!
EMI CLASSIFICATION
According to the standards EN 55103 this equipment is designed and suitable to operate in E3
(or lower E2, E1) Electromagnetic Environments.
TECHNICAL SPECIFICATION
FM 8 FM 10 FM 12
Amp and processor Power supply: Toroidal Transformer Toroidal Transformer Toroidal Transformer
Pre-Amp: 24bit 48KHz DSP 24bit 48KHz DSP 24bit 48KHz DSP
HF amp: Class-D 25 W/RMS Class-D 40 W/RMS Class-D 60 W/RMS
Bass amp: Class-D 75 W/RMS Class-D 160 W/RMS Class-D 240 W/RMS
Cooling: Convection, fan-free Convection, fan-free Convection, fan-free
Limiter: Peak, RMS, Thermal Peak,RMS, Thermal Peak, RMS, Thermal
X-over frequency: 1950 Hz, 24 dB/oct 1950 Hz, 24 dB/oct. 1850 Hz, 24 dB/ oct.
Audio Data Frequency response -3 dB: 85 Hz -20 kHz 78 Hz - 20 kHz 70 Hz - 20 kHz
Max SPL: 117 dB 120 dB 126 dB Bass/midrange woofer: 1x8“ Coaxial -2“ voice coil 1x10“ Coaxial -2“ voice coil 1x12“Coaxial -2“ voice coil
High frequency driver: 1x1“ compression driver 1x1“ compression driver 1x1“ compression driver
1“ voice coil Neodymium 1“ voice coil Neodymium 1,3“ voice coil
Horn coverage: 60° x 60° 60° x 90° 60° x 90°
Input section Signal input/link: XLR fem. Balanced XLR fem. Balanced XLR fem. Balanced
XLR male Balanced XLR male Balanced XLR male Balanced
Input sensitivity: -4dBu max -4dBu max -4dBu max
Mains connector IEC, VDE IEC, VDE IEC, VDE
Inrush current 9,7 A 13,7 A 14,8 A
Hardware Pole mount: 36 mm on left side 36 mm on left side 36mm on left side
Handles: one on bottom side one on bottom side one on bottom side
Grille: 1,5 mm Metal 1,5 mm Metal 1,5 mm Metal
Dimensions (W x H x D): 280 x 290 x 410mm 370 x 290 x 410mm 490 x 290 x 410mm
Weight: 9,8 kg 12,8 kg 17 kg