User Manual

CONFIRM
SELECT
Functions
Control
SELECT
46
ES-1203 Cod. 420120253 REV. 1.0
4. HOME PAGE, QUICK CONTROLS, MIXER
You can view and congure the various ES1203 system parameters
using the OLED screen [4] and the rotary button [5] in the
Functions Control section.
Pressing [5] selects and conrms a page or parameter. Pressing it
for a few seconds jumps to other pages (shortcut).
Turning it lets you browse the various pages or, if you are in the
parameters on a page, increase or decrease the selected value.
HOME PAGE AND QUICK CONTROLS
You can perform the following basic operations from the HOME
page (gure 1):
A. set the conguration type
B. select the digital steering (coverage angle)
C. set the MAIN LEVEL system volume
D. access the input conguration pages
E. access the extended MENU (see the EXTENDED SETTINGS
MENU chapter)
Lets see the steps listed above in detail:
A. use [5] to select the left box (gure 1) and highlight it. Conrm and turn to select the appropriate
conguration. You can set the ES1203 system as:
Figure 1
• MONO
• STEREO
• DOUBLE COLUMN STEREO MASTER LEFT (ML)
• DOUBLE COLUMN STEREO SLAVE LEFT (SL)
• DOUBLE COLUMN STEREO MASTER RIGHT (MR)
• DOUBLE COLUMN STEREO SLAVE RIGHT (SR)
Figure 2
In the DOUBLE COLUMN STEREO conguration (gure
2), each individual ES1203 is identied as the right or
left Master or Slave. There must be one Master and one
Slave. Master means the ES1203 system to which the
inputs are connected and on which you set up all the
adjustments, which will consequently control the Slave
system. Therefore, adjustments will be disabled on the
Slave system.
HOME PAGE
From this page, you can use a shortcut to access
the system mixers (see the INPUT, OUTPUT AND AUX MIXERS
paragraph).
English