User Manual

36
ES-1203 Cod. 420120253 REV. 1.0
ASSEMBLY (AND DISASSEMBLY) OF TWO TOPS (MONO CONFIGURATION)
In the mono conguration, you must
assemble the two tops (ES1203TOP) with
one on top of the other.
Each top features two sides.
One side has a 36 mm diameter hole [X]
for inserting the pole.
The other side has a locking system with
a rear safety lever [K].
• Flip one of the two tops as shown in
the gure
• Place one of the two tops on the
other with the two locking systems
aligned
• Apply pressure so that the two
locking systems engage. When they
are assembled correctly, the two
rear safety levers [K] move outwards
(released position) and each makes a
“click”.
To disassemble the two tops:
• Press the two rear safety levers
• Remove the two tops
CAUTION!
• BEFORE ASSEMBLY, MAKE
SURE THAT THE SAFETY
LEVERS [K] ARE PUSHED
INWARDS AND NOT IN
THE RELEASED POSITION
(OUTWARDS).
English