Reference Manual Owner's manual

7/16 Rev 1.0
3 GROUPS AND EQ
3.1 Create a Group
Each Device can be assigned to a group in order to change Eq. Delay and Gain.
To add a device to a group, Right-click on the device and click ‘Assign to Group’, then select the proper
group (from A to S, for example ‘A’).
After assigning a device to a group, its external edge gets the group default color.
3.2 Edit Eq, Gain and Delay of a Group
In order to edit Group parameters right-click on the device and click ‘Open Group Eq.’.
 GAIN: signal level attenuation (value: from 0 to –20 dB).
 DELAY: signal delay setting, expressed in the range of 0 ÷ 20 meters.
 INV. PHASE: when selected, the signal phase is inverted.