Data Sheet

Page 1 of 2
rev.1.1 - 2015
Flybar for DVA MINI systems
Description
The DRK-M5 ybar is the hanging bar
specically designed for lifting systems DVA
mini. It can be used to lift DVA M2M active
line-array modules, DVA M2S passive line-array
modules and DVA MS12 active subwoofers.
Thanks to the quick-locking system, it can
greatly speed up the assembly of DVA MINI
systems with huge time savings.
It is equipped with a front plastic cover with
the same elegant curvature of the DVA Mini
Series speakers. It completely covers all metal
parts of the y-bar, contributing to create a very
nice looking that makes these audio systems
perfectly adaptable to any environment.
The maximum weight that can be applied to the
DRK-M5 ybar depends on the attachment point
of the lifting hook. In any case the maximum
liftable weight ranges from 200 to 400kg
(CERMET certied).
The whole hanging system have been designed
and veried by technical load-tests, according
to the Italian Ministerial Decree “New technical
standards for construction” of 14 January 2008,
and to Eurocode 1 and Eurocode 3 standards
for steel structures.
The DRK-M5 kit, in addition to the ybar,
includes one xing pin, one M5x30mm screw
and a M5 anged nut as security locking system
of the rst M2M, M2S or MS12 module hooked
to the bar.
Finally, thanks to DVA Composer – the
Acoustical Simulation and Aiming software
for DVA Systems – you can easily design a
stereo system composed by tops and subs. The
DVA Composer also gives to the user all the
information about phase alignment between
own systems and ground stacked subwoofers,
as well as it suggests an optimized aiming of
the line arrays modules and their suggested
EQ presets, in order to guarantee maximum
performances even for non-expert customers.
Spec Sheet
DRK-M5
Applications
- Live sound for rental application in small
and mid-size venues
- Permanent installation in theatres, houses
of worship, convention centres, ballrooms,
Features
- Flybar for hanging DVA Mini systems (DVA
M2M + M2S, M2P and MS12)
- Used to hang binding loads up to 400Kg
- Clean aesthetic and very discreet look,
thanks to the plastic front cover
- Innovative fast-lock mechanism for a
extremely simplied rigging process
Installation Examples
DRK M5 + DVA M2M and M2S DRK M5 + DVA MS12