User Manual

dB
Technologies
Frequency Response [-3 dB] 70 Hz - 19.000 Hz
Max SPL 129 dB
LF 1 x 8” Neodymium woofer - 2.5” v.c.
MF 1 x 6.5” Neodymium midrange - 2” v.c.
HF 2 x 1” Compression driver - 1.4” v.c.
Directivity [H x V] 100° x 15°, single unit
Frequency Response [-3 dB] 39 Hz - 120 Hz
Max SPL 134 dB
LF 18” Woofer - 4” v.c.
Directivity Omnidirectional
Frequency Response [-3 dB] 34 Hz - 120 Hz
Max SPL 138 dB
LF 2 x 18” Woofer - 4” v.c.
Directivity Omnidirectional
Speaker Type 3-Way Active Line Array Module
Speaker Type Active Semi-Horn loaded Flyable Subwoofer Speaker Type Active Bassreflex - horn Subwoofer
Input Section 1x XLR balanced
Output Section 1x XLR balanced
Power Socket 1x Powercon In + 1 x Powercon Out
Input Section 2x XLR balanced
Output Section 2x XLR balanced
Power Socket 1x Powercon In + 1 x Powercon Out
Input Section 2x XLR balanced
Output Section 2x XLR balanced
Power Socket 1x Powercon In + 1 x Powercon Out
Amplifier technology Digipro® G3 Class-D
RMS Power 500 W
Peak Power 1000 W
Cooling Convection
Amplifier technology Digipro® G3 Class-D
RMS Power 900 W
Peak Power 1800 W
Cooling Convection
Amplifier technology Digipro® G3 Class-D
RMS Power 1800 W
Peak Power 3600 W
Cooling Convection
Controller DSP 56 Bit
AD/DA converter 24 bit/48 kHz
Limiter Dual Active Limiter Multiband RMS, Peak,
Thermal
Processing (filters) FIR Linear phase
X-over frequency MF-HF
Slope MF-HF
1800 Hz
24 dB/Octave
X-over frequency LF-MF
Slope LF-MF
340 Hz
24 dB/Octave
Controller DSP 56 Bit
AD/DA converter 24 bit/48 kHz
Limiter Dual Active Limiter Multiband RMS, Peak,
Thermal
X-over frequency LF-HF
Slope LF-HF
90 - 120 Hz (selectable)
24 dB/Octave
Controller DSP 56 Bit
AD/DA converter 24 bit/48 kHz
Limiter Dual Active Limiter Multiband RMS, Peak,
Thermal
X-over frequency LF-HF
Slope LF-HF
90 - 120 Hz (selectable)
24 dB/Octave
Enclosure Polypropylene PP Metal reinforced
Rigging Points Integrated rigging hardware (1.5° splay res.)
Dimensions (W x H x D) 580 x 240 x 327 mm
(23.2 x 9.6 x 13.08 in)
Weight 14.2 kg (31.3 lbs.)
Enclosure Multiplex birch plywood
Pole Mount 1 x M20 on top
Rigging Points Integrated for SRK10 Flykit (optional)
2 x Pick points on top to fix DRK10/20 Flybars
Dimensions (W x H x D) 515 x 640 x 720 mm
(20.6 x 25.6 x 28.8 in)
Weight 48 kg (105.82 lbs.)
Enclosure Multiplex birch plywood
Pole Mount 1 x M20 on top
Rigging Points 2 x Pick points on side to fix DRK10/20 rigging
frames
Dimensions (W x H x D) 1100 x 580 x 720 mm
(44 x 23.2 x 28.8 in)
Weight 84 kg (185.19 lbs.)
Acoustical Data
Acoustical Data
Acoustical Data
Technical Data
Technical Data Technical Data
Inputs
Inputs Inputs
Processor
Processor
Processor
Mechanics
Mechanics
Mechanics
Amplifier
Amplifier
Amplifier
Series
Power Supply 500 W SMPS with Auto-range PSU
Controls 1 x Input Sensitivity Rotary Switch
1 x DSP Setup Rotary Encoder (LF Correction)
1 x DSP Setup Rotary Encoder (MF-HF Correct.)
Power Supply 1000 W SMPS with Auto-range PSU
Controls 1 x Input Sensitivity Rotary Switch
1 x DSP Setup Rotary Encoder (Delay 4.5 ms)
1 x Phase Inversion Switch (0° - 180°)
1 x X-Over Frequency Switch (90 Hz - 120 Hz)
1 x Outputs Mode Switch (Link - X-Over)
Power Supply 2000 W SMPS with Auto-range PSU
Controls 1 x Input Sensitivity Rotary Switch
1 x DSP Setup Rotary Encoder (Delay 4.5 ms)
1 x Phase Inversion Switch (0° - 180°)
1 x X-Over Frequency Switch (90 Hz - 120 Hz)
1 x Outputs Mode Switch (Link - X-Over)