Quick start guide

www.dbtechnologies.com [e-mail]
DVA K5 Rev 1.2 cod. 420120232Q
Thank you for choosing a dBTechnologies Product!
DVA K5 is a 3-way active line array module, equipped with: two 1” compression driver exit (1.4” voice coil), one 6.5”
neodymium midrange (2” voice coil) and one 8” neodymium woofer (2.5” voice coil).
The powerful DIGIPRO® G3 amplifier section, capable of handling up to 500 W (RMS power), is controlled by a DSP,
which can perform a detailed customization of the output sound of the speaker. In particular, thanks to the new
dual rotary encoder interface, it is possible to quickly tune the line-array configuration coverage, using the FIR filter
technology.
Check the site www.dbtechnologies.com for the complete user manual!
1) Unpacking
The box contains:
N°1 DVA K5
N°1 100-120 V FUSE
This quick start and warranty documentation
2) Easy installation
DVA K5 can be installed in different configurations.
For a quick installation, in each side (left and right) of
the speaker you can find:
Movable bracket for front mounting (A)
Movable bracket for rear mounting, with splay
angles references for line-array setup (B)
Pin locks for a quick installation (C)
These brackets and pins are used to mount DVA K5
speakers each other in line-array configurations, and
to mount them with accessories (not included) for
different installation needs.
For each configuration choice, please consider the
main acoustic coverage (HxV) of one DVA K5 here
shown: 100°x15°.
Four examples of DVA K5 line-array configurations
(with optional accessories not included) are:
For further information about accessories and
configurations, download the complete user manual:
www.dbtechnologies.com/EN/Downloads.aspx or scan
the QR code.
Flown: K5, DRK 10 (DRK 20)
Fly Bar
Flown: K5, DVA KS10
subwoofer, DRK 10 (DRK20)
Fly Bar, SRK-10 kit
Stacked: K5, DVA KS10
subwoofer, SRK-10 kit
Stacked: K5, DVA KS20
subwoofer, DRK20 (drk10) Fly
Bar