User Manual

28
B-HYPE 8 - B-HYPE 10 - B-HYPE 12 - B-HYPE 15 Cod. 420120254 REV. 1.0
3. USAGE EXAMPLES
• Types of installation other than those here described are not allowed.
• Never use the handles to suspend the speaker
• Always check that the positioning is stable and that the installation does not pose a danger to
people, animals or property.
• Perform the installation on a at, not tilted surface, otherwise an additional safety fastening is
mandatory.
FLOOR USAGE AS A MONITOR
USAGE ON STAND
1 B-HYPE speaker can be installed on a tripod stand, coming as
standard option (accessory SSB2) with a 35 mm diameter pole. The
maximum allowed height between the speaker base and the oor is
180 cm for B-HYPE 8, B-HYPE 10, 165 cm for B-HYPE 12, B-HYPE 15.
WARNING!
• Use a suitably sized stand with the central leg
pointing forward to provide appropriate stability.
USAGE ON SUBWOOFER WITH POLE
It is possible to use a single speaker installed on a 35 mm diameter
pole (e.g. a SUB 600 series subwoofer). The reference accessory is
DS-2 (telescopic pole).
TThe maximum allowed height between the speaker base and
the oor is 165 cm for B-HYPE 8, B-HYPE 10, 120 cm for B-HYPE
12, B-HYPE 15 . In case of DVA S08DP or SUB 28D subwoofer, an
additional mechanical fastening or a belt fastening is required to
correctly and safely x the installation.
The cabinet rear 45° proles allow to use B-HYPE as a monitor, as
shown in the gure. Consider the asymmetric horn coverage for the
correct sound coverage of the stage.
English