User Manual
Table Of Contents
- 1. INFORMAZIONI GENERALI
- 2. PRIMA ACCENSIONE
- 3. ESEMPI DI UTILIZZO ED INSTALLAZIONE
- 4. AGGIORNAMENTO DEL FIRMWARE
- 5. RISOLUZIONE DEI PROBLEMI
- 6. SPECIFICHE TECNICHE DVA K5
- 1. GENERAL INFORMATION
- 2. FIRST SWITCH-ON
- 3. INSTALLATION EXAMPLES
- 4. FIRMWARE UPDATES
- 5. TROUBLESHOOTING
- 6. TECHNICAL SPECIFICATIONS DVA K5
42
DVA K5 Code 420120232 REV.1.0
English
For safe use of accessories, periodically check their functionality and integrity before
using them.
Accessories must be used by qualied personnel only! Make sure the installation is stable
and safe, to avoid any hazard to people, animals and/or property. The user must verify the
binding safety regulations and laws in force in the Country where the product is being
used. When installing the product follow the instructions provided herein.
ATTENTION!
DVA K5 can be lifted using DRL-45 lifting equipment. The line-array to be lifted must use a properly
installed DRK-10 y-bar.
USE OF DRL-45 LIFTING EQUIPMENT
DVA K5 can be wall-mounted, using the optional DWB 3 bracket. The further
mechanical accessories required for bracket installation are not included.
INSTALLATION WITH WALL BRACKET
• Never use the speaker handles, brackets or other components to hang the
system!
• When used outdoors, anchor the speaker to prevent any oscillations due
to atmospheric agents and wind.