User Manual

ManualsBrandsDB Technologies ManualsActive speakersDVA K5 - ACTIVE 3-WAY LINE ARRAY MODULE 1000W

Table Of Contents

1. INFORMAZIONI GENERALI
- BENVENUTI!
  - PANORAMICA INTRODUTTIVA
    - RIFERIMENTI PER L’UTENTE
      - CARATTERISTICHE MECCANICHE ED ACUSTICHE
        DIMENSIONI
        COPERTURA ACUSTICA
        ACCESSORI
        CARATTERISTICHE DELLA SEZIONE DI AMPLIFICAZIONE E DI CONTROLLO
        SEZIONE DI INGRESSO, USCITA E CONTROLLO
        SEZIONE DI ALIMENTAZIONE
2. PRIMA ACCENSIONE
- CONTENUTO DELLA CONFEZIONE
  - PREPARAZIONE ALL’UTILIZZO
    - UTILIZZO DI DBTECHNOLOGIES COMPOSER
      - MONTAGGIO DI DVA K5 IN CONFIGURAZIONE LINE-ARRAY
        COLLEGAMENTO E RILANCIO DELL’ALIMENTAZIONE
        COLLEGAMENTO E RILANCIO DEL SEGNALE AUDIO
        CONFIGURAZIONE ED OTTIMIZZAZIONE IN LINE-ARRAY
        STACKED
        FLOWN
3. ESEMPI DI UTILIZZO ED INSTALLAZIONE
4. AGGIORNAMENTO DEL FIRMWARE
5. RISOLUZIONE DEI PROBLEMI
6. SPECIFICHE TECNICHE DVA K5
- GENERALE
  - DATI ACUSTICI
    - AMPLIFICATORE
      - PROCESSORE
        INTERFACCIA UTENTE
        INGRESSI ED USCITE
        SPECIFICHE DI ALIMENTAZIONE (ASSORBIMENTO)
        SPECIFICHE MECCANICHE
1. GENERAL INFORMATION
- WELCOME!
  - PRELIMINARY OVERVIEW
    - USER REFERENCES
      - MECHANICAL AND ACOUSTIC CHARACTERISTICS
        DIMENSIONS
        ACOUSTIC COVERAGE
        ACCESSORIES
        CHARACTERISTICS OF THE AMPLIFICATION AND CONTROL SECTION
        INPUT OUTPUT AND CONTROL SECTION
        POWER SUPPLY SECTION
2. FIRST SWITCH-ON
- PACKAGE CONTENTS
  - PRELIMINARY OPERATIONS
    - USING DBTECHNOLOGIES COMPOSER
      - INSTALLING DVA K5 IN A LINE-ARRAY CONFIGURATION
        POWER SUPPLY CONNECTION AND LINKING
        INPUT CONNECTION AND EXTENSION
        CONFIGURATION AND OPTIMISATION WITH DSP IN LINE-ARRAY
        STACKED
        FLOWN
3. INSTALLATION EXAMPLES
4. FIRMWARE UPDATES
5. TROUBLESHOOTING
6. TECHNICAL SPECIFICATIONS DVA K5
- GENERAL
  - ACOUSTIC DATA
    - AMPLIFIER
      - PROCESSOR
        USER INTERFACE
        INPUTS AND OUTPUTS
        POWER SUPPLY SPECIFICATIONS
        DIMENSIONS

DVA K5 Code 420120232 REV.1.0

English

ATTENTION!

POWER SUPPLY SECTION

7. “AUTO-RANGE MAINS INPUT” POWER SUPPLY INPUT

Power supply input for cable equipped with NEUTRIK® powerCON® connector.

8. “MAINS LINK” POWER SUPPLY LINKING OUTPUT

Output allowing to extend the power supply to a second module through a

cable equipped with a NEUTRIK

® powerCON connector.

9. “MAINS FUSE” PROTECTION FUSE

Mains fuse

• Only use cables equipped with high-quality genuine Neutrik® connectors.

• Never use the speaker for a prolonged time while the limiter LED is on or blinking, indicating

the equipment is running under excessive stress conditions

1. Disconnect all connections,

including the power supply one.

2. Wait for 5 minutes.

3. Replace the fuse with the one

included in the package for the

• The speaker is supplied with a pre-installed fuse

designed to operate within the 220-240 V range.

Should it need to operate within the 100-120 V