User Manual

28
DVA K5 Code 420120232 REV.1.0
English
ACOUSTIC COVERAGE
MECHANICAL AND ACOUSTIC CHARACTERISTICS
DIMENSIONS
DVA K5 only weighs 14.7 kg (32,41 lbs), and thanks to its small
dimensions - 580 x 240 x 327 mm - it can be handled and
transported easily.
The reinforced polypropylene cabinet has a metal inner frame,
preventing unwanted resonances and vibrations. The built-in
brackets and the standard pins are ready to use and allow to
quickly install, in the proper arrangement, a line-array having
the desired characteristics.
The acoustic coverage, for reference purposes, of a single
module, as shown in the gure, is of 100 x 15°. The actual
coverage depends on the use of multiple modules in a line-
array arrangement. We recommend that you design it with
the help of the free software dBTechnologies Composer.
ACCESSORIES
The following items are available as optional, for system
installation, transport and protection:
For any further information, please refer to the site www.dbtechnologies.com and to the relevant manuals of
each individual accessory.
The gure below shows a sample DRK-10 y-bar and the y-bar in
question installed on a DT-6 trolley, for transport purposes only.
• DRK-10 and DRK-20 y-bars
• DRK-HK hook, to be used in conjunction with DRK-20
• DRK-20M motor-driven y-bar
• SRK-10 installation kit (for installation with DVA KS10
subwoofer only)
• Bracket DWB-3 for wall installation and DSA-4 for oor
or pedestal support installation.
• Trolley allowing to transport 1 to 6 DT-6 modules
• Flight case containing 1 to 4 DF-4 modules
• Built-in ight case with trolley, housing and allowing to transport up to 4 DTF-4 modules
• Lifting equipment for hanging speakers DRL-45
• Extension cables DCK-15, DPC-15, DAC 15, DPC-1000M, cable kit DCK-15, DCK-45 and DCK-45 TypeB