User Manual

47
ES-1203 Cod. 420120253 REV. 1.0
Figure 6
Figure 4
Figure 3
B. You can change the digital steering of the tops by
selecting and pressing [5] after you have conrmed
a MONO or DOUBLE COLUMN STEREO conguration,
choosing from:
• UP (upwards)
• FAR (no angle)
• DOWN (downwards)
Press [5] again to conrm your chosen option
(e.g. gure 3)
C. Select and conrm MAIN LEVEL (gure 4) to increase
or decrease the overall ES1203 system volume.
D. Select and conrm the desired input to access the
corresponding sub page. The available inputs are:
• CH1
• CH2
• CH3
• BLUETOOTH®
The CH2 and CH3 inputs are initially set as a
single stereo channel (L+R). Once you have
accessed the sub page, you can use them as
two separate mono channels by selecting the
input type.
Figure 5
The table below shows the adjustable parameters for
inputs CH1, CH2 and CH3:
While choosing the conguration,
left and right arrows appear
under the system diagram.
While choosing the steering,
up and down arrows appear
under the system diagram.
NAME PARAMETER RANGE
GAIN
INPUT GAIN [0, 10, 20] dB
LEVEL
OUTPUT LEVEL (SENT TO THE INTERNAL MIXER) -∞ ÷ 3 dB
TYPE
INPUT TYPE
CH1: MIC/INST - CH2,
CH3:MIC/LINE
EQ
FILTERS THAT CAN BE APPLIED TO MICROPHONE, INSTRUMENT OR LINE
INPUTS
SEE THE TABLE ON
PAG. 48
AUX
AUXILIARY SEND MIXER (NOT AVAILABLE IN THE DOUBLE COLUMN
CONFIGURATION)
-∞ ÷ 3 dB
SEE: INPUT, OUTPUT AND AUX
MIXERS PARAGRAPH
PAN
PANNING EFFECT (NOT AVAILABLE IN THE MONO CONFIGURATION) L ÷ R
English