User Manual

38
ES-1203 Cod. 420120253 REV. 1.0
AMPLIFIER AND CONTROL SECTION FEATURES
The core of the ES range is the class-D digital
amplier. The system is silent and is controlled
by a dedicated powerful DSP that manages
various parameters. These are completely
congurable, thanks to the control interface.
The amplier power is 1200 W RMS.
The ES1203 panel features:
CAUTION!
• Input, Output and Control section
• Power supply and Top connection section
INPUT, OUTPUT AND
CONTROL SECTION
• Do not obstruct the amplier cooling ns
at the back. In the event of overheating,
the audio volume is gradually reduced until
the module is thermally stable. The level
is automatically restored on reaching the
correct operating temperature.
• Do not attempt to open the amplier.
• In the event of malfunction, immediately
turn off the power, disconnect the module
from the mains and contact an authorised
repairer.
• The system comes with a fuse already tted
for operation in the 220 - 240 V range. If
you need to operate it in the 100-120 V
range:
1. Disconnect all connections, including
the power supply.
2. Wait for 5 minutes.
3. Replace the fuse with the one supplied
in the package for the 100-120 V range.
• Only use the cables provided.
• Never remove the protective grille from the
front of the product. To prevent an electric
shock hazard, immediately disconnect the
power supply in the event of accidental
damage or when replacing the protective
grille (to be done by the assistance service).
Never connect the mains power with the
grille removed.
CAUTION!
AMPLIFIER
POWER SUPPLY AND
TOP CONNECTION
SECTION
English