User Manual

INGENIA IG3T Cod. 420120239 REV. 1.1

This menu automatically congures the system

according to the number of speakers, to the presence

or absence of a subwoofer, as well as to the location

and inclination of the speakers. It consists of 3 sub-

menus:

The system can detect, through infra-red communication (the communication ports

are installed on the speaker handles and detection is automatic) whether the user is

using one or two IG3T speakers. After accessing this screen:

The menu allows to manually update the conguration of the system in use,

adding or removing one or more subwoofers. If you need to update the number of

connected subwoofers:

1. Turn the rotary encoder selecting Selfcheck System, then conrm the choice by pressing the push rotary

encoder.

2. After a short animation, the system automatically switches to the next menu (SYSTEM STRUCTURE).

3. If this operation doesn’t need to be performed, select and conrm NEXT; if you need to return to the main

screen, select and conrm BACK

1. turn the rotary encoder, select the “subwoofer” item and conrm it

2. select and conrm the number of subwoofers you want to use

3. select and conrm NEXT to switch to the next menu; select and conrm BACK to return to the SYSTEM

CHECK sub-menu

• SYSTEM CHECK

• SYSTEM STRUCTURE

• SYSTEM TYPE

BUILD SYSTEM MENU

SYSTEM CHECK

SYSTEM STRUCTURE

Build System Menu

Sub-menus

English