User Manual

INGENIA IG3T Cod. 420120239 REV. 1.1

CONNECTING OUTPUTS BETWEEN MULTIPLE MODULES (power supply linking)

English

NOTE FOR THE INSTALLER (100-120V). The nameplate data on the speaker panel refer to (and are

limited to) the cable provided. If you do not use the supplied cable, the maximum allowed limits of

currents (and powers) of LINK are indicated in the following table:

Model Current (100-120 V) Powers (100-120 V)

IG3T (100-120 V) 14 A 1600 W

The cables must be properly sized and design, installation and system testing should be performed

exclusively by qualied personnel. A.E.B. Industriale accepts no responsibility in case of use of

cables which are unsuitable, non-certied, non-compatible with the correct system sizing and the

regulations in force in the country of use.

POWER SUPPLY LINK