User Manual

u
s
e
r m
a
n
u
a
l
En
g
l
i
sh
English
9
E
n
g
l
i
s
h
English
u
s
e
r
m
a
n
u
a
l
10
PROTECTIONS
The speakers’s components in the box are protected by 1.0mm metal steel grille.
Cooling
Thermal control is provided by the internal DSP, by means of one sensor, controls the
temperature of the amplifier, avoiding overheating by limiting the overall volume.
In case of overheating (> 90°C) the volume decreases proportionally to the temperature
increase, making the change unno
Front Grille
ticeable.
The correct volume and all the functions are automatically restored when standard
operating temperatures are reached.
LOUDSPEAKER INSTALLATION
WARNING
Make sure that the loudspeaker is securely installed in a stable position to avoid any
injuries or damages to persons or property.
For safety reasons do not place one loudspeaker on top of another without proper fastening
systems. Before hanging the loudspeaker check all the components for damages,
deformations, missing or damaged parts that may compromise safety during installation.
If you use the loudspeakers outdoors avoid places that are exposed to bad weather.
The loudspeaker has the following mounting options:
- bookshelf (Fig. 1)
- floor (monitor) (Fig.2)
- on speaker stands (Fig.3).
WARNING
Never use the handles to hang the speaker!
C
r
o
m
o
TECHNICAL SPECIFICATION
Amp and processor
Input section
Hardware
CROMO 8 CROMO 12CROMO 10
Power supply: Toroidal Transformer
HF amp: Class-D 40 W/RMS Class-D 60 W/RMS
Bass amp: Class-D 140 W/RMS Class-D 240 W/RMS
Cooling: Convection, fan-free Convection, fan-free
Limiter:
X-over frequency: 2000 Hz, 24 dB/oct. 1900 Hz, 24 dB/ oct.
Signal input/link: XLR fem. Balanced XLR fem. Balanced
6,3mm JACK balanced 6,3mm JACK balanced
Input sensitivity:
Mains: IEC, VDE IEC, VDE
Pole mount: 36 mm 36mm
Handles (rubber): one on top (with rubber) one on top (with rubber)
Monitor use angles:
Grille: 1 mm Metal 1 mm Metal
Dimensions (W x H x D): 270 320 x 508 x 297mm 402 x 615 x 356mm
Weight: 7 12 kg 18,5 kg
Electrical protection class:
Toroidal Transformer Toroidal Transformer
Pre-Amp: 24bit 48KHz DSP 24bit 48KHz DSP 24bit 48KHz DSP
Class-D 20 W/RMS
Class-D 80 W/RMS
Convection, fan-free
Peak, RMS, Thermal Peak,RMS, Thermal Peak, RMS, Thermal
2100 Hz, 24 dB/oct
Frequency response -10 dB: 68 Hz - 20 kHz 65 Hz - 20 kHz 55 Hz - 20 kHz
Frequency response +-3 dB: 80 Hz - 19 kHz 70 Hz - 19 kHz 60 Hz - 19 kHz
Max SPL: 118 dB 121 dB 126,5 dB
Bass/midrange woofer: 1x8“ Ceramic -1,5“ voice coil 1x10“ Ceramic -1,5“ voice coil 1x12“Cearamic -2“ voice coil
High frequency driver: 1x1“ compression driver 1x1“ compre
1“ voice coil Neodymium 1“ voice coil Neodymium 1,5“ voice coil
Horn coverage: 90°/70° x 60° 90°/70° x 60° 90°/70° x 60°
XLR fem. Balanced
6,3mm JACK balanced
-40dBu/0dBu (Mic/Line) -40dBu/0dBu (Mic/Line) -40dBu/0dBu (Mic/Line)
IEC, VDE
36 mm
one on top (with rubber)
45° both sides 45° both sides 45° both sides
1mm Metal
x 435 x 252mm
,8 kg
II II II
Optional accessories: gig bag gig bag gig bag
Audio Data
ssion driver 1x1“ compression driver
EMI CLASSIFICATION
According to the standards EN 55103 this equipment is designed and suitable to operate in E3
(or lower E2, E1) Electromagnetic environments.