Operating instructions

Components

Directional nozzle can be rotated 360°

to any desired position

Diverting

Non-Diverting

Blower Control Valve

Controls the intensity of the air blower on spas

equipped with a bubbling system.

Pillow Jet Control Valve

Controls the water intensity flow to the pillow

jets. Turn the valve clockwise to lessen the intensi-

ty; counter-clockwise to increase the intensity.

Therapy Control Valve

Controls the water to air ratio to vary the

intensity of the jet.

Diverter Valve

Rotate valve to divert flow to specific sections

of the hot tub. See special operating instruc-

tions for more details.

Throttle Control Valve

The patented Throttle Control Valve controls the

jet intensity of an entire seat without affecting

others areas.

Valves (Optional on some spa models)

Shoulder Jet

This unique jet is designed to be installed above the water line. The opening at the bottom of the jet is angled

specifically to direct a powerful stream of water to your neck and shoulders. The smart design of this jet

helps reduce splash-out by 75% over other directional shoulder jets. Jet may be turned off by pushing in or

turned on by pulling out.

Whirlpool Jets

A large round jet that is particularly good for those with special therapy needs because they create a

powerful current.

Diverting: Adjust the jet nozzle to direct water flow. Turn outer ring until it clicks and is

fully seated to select any one of four positions. These positions will divert water flow to various sections of

the hot tub. See Special Operating Instructions for further details specific to your spa model.

Non-Diverting: Adjust the jet nozzle to direct water flow. Turn outer ring to control intensity.

Push in

OFF

Pull out