Instruction manual

Appendix 1. Outline Dimension Drawings
A1 - 6
• SJ-V3.7-01 with standard flange
168
4-φ12
□174
□176
φ35
5 5
φ
1
9
0
160
60
12
5
390
330
295
48
φ
2
2
0
φ
1
8
5
845
Ａ
Ａ
8
φ28j6
16
2-M6
ＡＡ
Exhaust air
Terminal bo
x
Cooling fan
Cooling air inlet
Screw
Cross section
A-A
Flange
[Unit: mm]
(Note 1) Provide a clearance of 30mm or more between the cooling fan and wall.
(Note 2) The shaft can also be mounted upward.
(Note 3) If the suspension bolts are removed during operation, plug the screw holes with bolts.
• SJ-V3.7-01 with standard legs
176
35
180
4-φ10
70
70
φ28j6
2-M6
16
8
100 56
130 41
45 8
295
330
60
390
168
Ａ
Ａ
160
φ35
55
ＡＡ
Exhaust air
Terminal box
Cooling fan
Screw
Cross section
A-A
Cooling
air inlet
[Unit: mm]
(Note 1) Provide a clearance of 30mm or more between the cooling fan and wall.
(Note 2) The shaft can also be mounted upward.
(Note 3) If the suspension bolts are removed during operation, plug the screw holes with bolts.