Instruction manual

5. Peripheral Devices
5 - 8
5-5 Noise filter
(1) Selection
Use an EMC noise filter if the noise conducted to the power line must be reduced. Select an EMC
noise filter taking the power supply unit's input rated voltage and input rated current into
consideration.
(2) Noise filter mounting position
Install the noise filter to the power supply unit’s power input as the diagram below indicates.
Power supply unit
MDS-C1-CV
T
S
R
Noise filter
Breaker
Power
supply
Power
distribution panel
Contactor
AC reactor
(Note) The noise filter must be prepared by the user.
Recommended devices: Okaya Electric Industries 3SUP-HL-ER-6B Series
Soshin Electric HF3000C-TMA Series
Contact: Okaya Electric Industries Co., Ltd. Telephone: [phone]
([phone])
http://www.okayaelec.co.jp
Soshin Electric Co., Ltd. Telephone: [phone]
([phone])
http://www.soshin.co.jp
(Note) The above devices may be changed at the manufacturer's discretion.
Contact each manufacturer for more information.