Instruction manual

4. Dedicated Options
4 - 10
(2) Spindle detector cable
Item Model Contents
Spindle drive unit side
connector (3M)
Connector
: 10120-3000VE
Shell kit
: 10320-52F0-008
Spindle motor side connector
For 2-type
(Tyco Electronics AMP)
Plug
: 350720-1
Pin
: 350689-1
For E-type (J.S.T.)
Crimped terminal: V1.25-4
For CN5 Motor PLG cable
Connector type
2: Connector
E: Crimped terminal
A
xis No. (1 to 8 axis)
1: No. 1 axis
to
8: No. 8 axis
System No.
None : 1st system
2 : 2nd system
P : PLC axis
-
CNP5-
Length:
2, 5, 10, 20, 30 m
Spindle drive unit side
connector (3M)
Connector
: 10120-3000VE
Shell kit
: 10320-52F0-008
Magnetic sensor side
connector
For 2-type (Tajimi Musen)
Plug: TRC116-12A10-7F10.5
For E-type (J.S.T.)
Crimped terminal: V1.25-4
Magnetic sensor cable
Connector type
2: Connector
E: Crimped terminal
A
xis No. (1 to 8 axis)
1: No. 1 axis
to
8: No. 8 axis
System No.
None : 1st system
2 : 2nd system
P : PLC axis
-
CNP6M-
Length:
2, 5, 10, 20, 30 m
Spindle drive unit side
connector (3M)
Connector
: 10120-3000VE
Shell kit
: 10320-52F0-008
Spindle side detector
(1024p/rev encoder) side
connector
For 2-type (DDK)
Plug : MS3106A20-29S
Clamp
: MS3057-12A
For 3-type (DDK)
Plug
: MS3108A20-29S
Clamp
: MS3057-12A
For E-type (J.S.T.)
Crimped terminal: V1.25-4
For CN6
Spindle side detector (1024p/rev encoder)
cable
Connector type
2: Straight cannon
3: Angle cannon
E: Crimped terminal
A
xis No. (1 to 8 axis)
1: No. 1 axis
to
8: No. 8 axis
System No.
None : 1st system
2 : 2nd system
P : PLC axis
-
CNP6A -
Length:
2, 5, 10, 20, 30 m
(Note) The connector manufacturer is subject to change without notice.
2-type
E-type
2-type
E-type
E-type
3-type
2-type