Instruction manual

2. Specifications
2 - 3
Large capacity series
SJ- SJ-V
Spindle motor type
30A 37BP 45BP 55-01
Compatible spindle drive unit type
MDS-B-
SPA-370 SPA-450 SPA-550
Continuous rating
[kW]
22 30 37 45
Output
capacity
30-minute rating
50%ED rating
[kW]
30 37 45 55
Base speed [r/min] 1500 1150
Maximum speed [r/min] 4500 3450
Frame No. B160 B180 A200 A225
Continuous rated torque [N·m] 140 249 307 374
GD
2
[kg·m
2
] 0.69 1.36 2.19 3.39
Inertia [kg·m
2
] 0.17 0.34 0.55 0.85
Tolerable radial load [N] 2940 4900 5880 5880
Input voltage Single-phase 200V 3-phase 200V
Cooling
fan
Maximum power
consumption
130W 60W 115W
Ambient temperature Operation: 0 to 40°C (non freezing), Storage: –20 to 65°C (non freezing)
Ambient humidity
Operation: 90%RH or less (non condensing),
Storage: 90%RH or less (non condensing)
Atmosphere Indoors (no direct sunlight); no corrosive gas, inflammable gas, oil mist, or dust
Environ-
ment
Altitude
Operation: 1000 meters or less above sea level,
Storage: 1000 meters or less above sea level
Weight [kg] 200 300 390 450
Insulation Class F
(Note 1) The rated output is guaranteed at the rated input voltage (200/220/230VAC) to the power supply unit.
If the input voltage fluctuates and drops below 200VAC, the rated output may not be attained.
(Note 2) The 50%ED rating applies for a 10-minute cycle time consisting of ON for five minutes and OFF for five minutes.
(Note 3) The 37kW and larger capacities are available with the MDS-B-SPA Series. Refer to Appendix 4 for details.