Instruction manual

Appendix 8. Instruction Manual for Compliance with UL/c-UL Standard
A8 - 5
4.6.1 MDS-B-V1/2/14/24, MDS-C1-V1/2 Series
Parameter
No.
Parameter
Abbr.
Parameter
Name
Setting Procedure
Standard
Setting Value
Setting
Range
SV021 OLT Overload
Time constant
Set the time constant for overload
detection. (Unit: 1 second.)
60s 1 to 300s
SV022 OLL Overload
Detection level
Set the overload current detection level
with a percentage (%) of the stall rating.
150% 1 to 500%
4.6.2 MDS-B-SP, MDS-C1-SP, MDS-C1-SPA Series
Parameter
No.
Parameter
Abbr.
Parameter
Name
Setting Procedure
Standard
Setting Value
Setting
Range
SP063 OLT Overload
Time constant
Set the time constant for overload
detection. (Unit: 1 second.)
60s 0 to 1000s
SP064 OLL Overload
Detection level
Set the overload current detection level
with a percentage (%) of the rating.
110% 1 to 200%
4.7 Field Wiring Reference Table for Input and Output
Use the UL-approved Round Crimping Terminals to wire the input and output terminals of MDS-B
Series.
Crimp the terminals with the crimping tool recommended by the terminal manufacturer.
Following described crimping terminals and tools type are examples of Japan Solderless Terminal Mfg.
Co., Ltd.
4.7.1 Power Supply Unit (MDS-B-CVE, MDS-C1-CV Series)
Capacity [kW] 3.7 to 7.5 11.0 to 18.5 22.0 to 37.0 45.0 55.0
P, N
(L+, L-)
M6 M6 M6 M6, M10
Screw Torque
[lb in/ N m]
44.3/5.0 49.6/5.6 49.6/5.6 49.6/5.6, 177/20
L11, L21, MC1
(R0, S0)
M4 M4 M4 M4 M4
Screw Torque
[lb in/ N m]
17.4/2.0 14.2/1.6 14.2/1.6 14.2/1.6 14.6/1.6
L1, L2, L3 M4 M5 M8 M8 M10
Terminal
Screw Size
Screw Torque
[lb in/ N m]
14.6/1.6 29.8/3.37 117.2/13.2 117.2/13.2 177/20
P, N (L+, L-)
Capacity [kW] 3.7, 5.5 7.5 11.0 15.0 18.5, 22.0
#10/60°C #8/60°C #4/60°C #4/60°C #3/60°CWire Size (AWG)
/Temp Rating Note 1
#12/75°C #10/75°C #8/75°C #4/75°C #4/75°C
R8-6 R22-6Crimping Terminals
Type
R5.5-6
R5.5-6 R8-6
R22-6
YHT-8S YPT-60
Crimping Tools Type YHT-2210
YHT-2210 YHT-8S
YPT-60
Capacity [kW] 26.0 30.0 37.0 45.0 55.0
#1/60°C Wire Size (AWG)
/Temp Rating Note 1
#3/75°C
#1/75°C #1/0/75°C
The bus bar is attached
to the product.
38-S6 Crimping Terminals
Type
R22-6
38-S6
L330T
459-12
Crimping Tools Type YPT-60
YET300
YF-1