Product data

Page 8
Installation, Operation & Maintenance Manual # 036-1009(0608)
PHASING
YORK Saber units are properly phased at the factory. Check for
proper compressor rotation. If the blower or compressors rotate
in the wrong direction at start up, the electrical connection to the
unit is mis-phased. Change the incoming line connection phasing
to obtain proper rotation.
CAUTION
UNITS ARE PROPERLY PHASED AT THE FACTORY. DO NOT
CHANGE THE INTERNAL WIRING TO MAKE THE BLOWER,
CONDENSER FAN, OR COMPRESSOR ROTATE CORRECTLY.
Figure 6: Typical Field Wiring Schematic