Product data
Page 3
Installation, Operation & Maintenance Manual # 036-1009(0608)
GENERAL
YORK Saber units are single package air conditioners equipped
with optional factory installed electric heaters and designed for
outdoor installation on a rooftop or steel structure.
The units are completely assembled on a rigid base frame. All
piping, refrigerant charge, and electrical wiring is factory installed
and tested. The units require electric power, duct connections
and drain piping connections at the point of installation.
The supplemental electric heaters have nickel-chrome elements
and utilize single point power connection.
SAFETY CONSIDERATIONS
Due to system pressure, moving parts and electrical components,
installation and servicing of air conditioning equipment can be
hazardous. Only qualified, trained, service personnel should
install, repair, maintain or service this equipment.
Observe all precautions in the literature, on labels and tags
accompanying the equipment whenever working on air
conditioning equipment. Be sure to follow all other safety
precautions that apply.
Wear safety glasses and work gloves, and follow all safety codes.
Use a quenching cloth and have a fire extinguisher available for
all brazing operations.
INSPECTION
As soon as a unit is received, it should be inspected for possible
damage during transit. If damage is evident, the extent of the
damage should be noted on the carrier’s freight bill.
RENEWAL PARTS
Refer to York USER’S MAINTENANCE and SERVICE
INFORMATION MANUAL. It is strongly suggested that only
genuine YORK Spare Parts are used to ensure efficient working
of the unit and safety.
Installer should pay particular attention to the words :
NOTE, CAUTION and WARNING.
NOTES are intended to clarify or make the installation easier.
CAUTIONS are given to prevent equipment damage.
WARNINGS are given to alert installer that personal injury and/
or equipment damage may result if installation procedure is not
handled properly.
TYPICAL UNIT CONFIGURATION
CAUTION
THIS PRODUCT MUST BE INSTALLED IN STRICT COMPLIANCE
WITH THE ENCLOSED INSTALLATION INSTRUCTIONS AND
ANY APPLICABLE LOCAL, STATE, AND NATIONAL CODES
INCLUDING, BUT NOT LIMITED TO, BUILDING, ELECTRICAL, AND
MECHANICAL CODES.
IMPROPER INSTALLATION MAY CREATE A CONDITION WHERE
THE OPERATION OF THE PRODUCT COULD CAUSE PERSONAL
INJURY OR PROPERTY DAMAGE.
WARNING
Figure 1: Typical Unit Configuration