Specifications

SUBTREX______________________________________________________________________________
10| Operating Manual ver. SUBTREX-EN-1.0
In the connection panel there are two Speakon NL4 connectors referred as
‘IN’ and ‘OUT’.
IN is the input connector and must be connected to the amplifier, ‘OUT’ is a
LINK OUT and can be connected to other systems.
Recommended configuration using multiple speakers is represented below:
You can now use the system
Amplifier
Output A
Output B
Input A
Input B
Mixer
NL4 Pin Configuration
Pins 1+ and 1- Used
Pins 2+ and 2- Not Used
Amplifier Load (per Output Channel)
# of Speakers Nominal Minimum
1 4 Ohms 3.5 Ohms
2 2 Ohms 1.8 Ohms
Caution: Do not exceed the
maximum load rating of
the amplifier.