PROFESSIONAL AUDIO SYSTEM TREX OPERATING MANUAL Ver. TREX-EN-1.0 LSS Advanced Speaker Systems Via On. Longo 53-89024 Polistena (RC) ITALY Tel (39) 966 9321299 – Fax (39) 966 933007 Email: info@lss.it - Internet: www.lss.
TREX_________________________________________________________________________________ NOTICE: LSS products are manufactured for use according to proper procedures by a qualified operator and only for the purposes described in this manual. The following conventions are used to indicate and classify precautions in this manual. Always heed the information provided with them. Failure to heed precautions can result in injury to people or damage to property. © LSS, 2014 All rights reserved.
______________________________________________________________________________ SUMMARY INTRODUCTION ............................................................................................................................................ 4 SAFETY AND WARNING.............................................................................................................................. 5 APPLICATION..............................................................................................................
TREX_________________________________________________________________________________ INTRODUCTION Congratulation on the purchase of your new LSS loudspeaker. Quality innovation and versatility, this is a summary of the new system developed by LSS for professional sound users. LSS produces professional audio products – the result of exceptional engineering and meticulous craftsmanship. This manual is intended for use with LSS loudspeaker.
______________________________________________________________________________ SAFETY AND WARNING IMPORTANT! SAFETY WARNING! In the interest of their own and others' safety and to prevent voiding the warranty, we recommend a careful reading of this section before using the product. - This product was designed and manufactured to be used as a speaker system in the context of a typical sound reinforcement system.
TREX_________________________________________________________________________________ APPLICATION LSS’sTREX is an arrayable 2-way horn-loaded long-throw loudspeaker system designed for a wide range of medium to long-throw applications. The LSS’s TREX tightly defined coverage pattern allows seamless integration into array clusters, which may be tight-packed for long throw or splayed for broader coverage. This systems was designed for a wide range of professional applications.
______________________________________________________________________________ TECHNICAL SPECIFICATIONS PHYSICAL Dimensions mm (±1 mm) [Inches] Weight Kilograms Frequency Response Sensitivity (1 Watt @ 1 m) Max SPL Calculated SYSTEM PERFORMANCE Nominal Input Impedance (Ω) Power Handling (Watt cont. AES) Peak Power (W) Nominal Dispersion (@ -6 dB) Enclosure material Finish MECHANYCAL Suspension Grille Connectors Height 940 [37.01"] Front Width 600 [23.62"] Depth 700 [27.56"] Rear width 700 [14.
TREX_________________________________________________________________________________ INSTALLATION AND WIRING TREX can be installed stand alone or in stack configuration, in most cases with SUBTREX subwoofer. It must be installed only in vertical position. In the bottom of the case there are two plastic skeeds used as feet to support the speaker. If installation is in stacking mode, plastic skeed fit on the recesses placed in the top of the case placed beneath. 8| Operating Manual ver. TREX-EN-1.
______________________________________________________________________________ In addition, it can be installed suspended through the mounting brackets placed inside the case. There is a total of eight brackets inside the case: four in the top and four in the bottom. Each bracket is secured to two adjacent internal side of speaker using two M10 screwbolts. If needed, replace the screwbolts with eyebolts. More detaliled: Two brackets are connected between top and left side of case.
TREX_________________________________________________________________________________ For a correct operation, use a 4-poles cable. Two different channels are necessary to make speakers works. One channel for LF and another one for HF. Internal connection are made as follow: Speakon Pinout Transducer connector 1+ LF+ 1LF- 2+ HF+ 2HF- TREX system operating mode is only Bi-Amp (LF 1- 1+; HF 2- 2+) and needs an external digital processor with custom setup provided by LSS.
______________________________________________________________________________ WEEE DIRECTIVE WEEE Directive Warning! The product is marked with this symbol which indicates not to discard electrical and electronic equipment via the normal procedure for disposal of household waste. For these products there is a diverse collection system in accordance with legislation that requires proper treatment, recovery and recycling of used products. For more information please contact the appropriate local authority.
TREX_________________________________________________________________________________ TROUBLESHOOTING Problem Possible cause (s) Amplifier 1. No Sound Wiring 2. Poor Low Frequency Response Speakers wired outof-polarity 3. Intermittent output such as crackling or distortion Faulty Connection Action Connect a known working test speaker to the amplifier outputs.
______________________________________________________________________________ DIMENSIONS TOP FRONT REAR 70cm 60cm BOTTOM 36cm 94cm SIDE Operating Manual ver. TREX-EN-1.
TREX_________________________________________________________________________________ NOTES 14| Operating Manual ver. TREX-EN-1.
______________________________________________________________________________ CONTACT INFORMATION: LSS Advanced Speaker Systems Via On. Longo 53 89024 Polistena (RC) ITALY Tel (39) 966 9321299 – Fax (39) 966 933007 Email: info@lss.it - Internet: www.lss.it Operating Manual ver. TREX-EN-1.
