User Manual

Video Editor 7-5
■
Adjust clip track offset of single clip on the master track:
<Shift><Left Mouse> Select in the middle of the clip then
move the mouse while holding both buttons.
■
Adjust clip track offset of a single clip on the master track,
without sliding any other clips (on any track) Must be used
with an existing gap or at the end of a segment. Mimics the
normal behavior of non-master tracks. <alt><left mouse>Select
in the middle of the clip then move th mouse while holding
both buttons.
■
Adjust clip track offset on master track sliding only clips on the
master track: (creates or closes a gap without maintaining a
relationship between other tracks) <alt><shift><left
mouse>Select in the middle of the clip then move th mouse
while holding all buttons.
■
Select multiple contiguous clips on any track; for Drag/Drop,
Deletion, or Copy/Paste. <ctrl><shift><left mouse> Select a clip
first with the left mouse then select the last clip in a group,
while holding the buttons, all clips in between will be selected.
■
Delete one or more clips on the master track, closing the gap
between clips. Select the clip or clips as above then click the
Delete button.
■
Delete one or more clips on the master track, leaving a gap:
<shift><del> Select the clip(s) and push both keys.
■
Copy clips within the track.<ctrl><left mouse> Push and hold
the control key while dragging and dropping with the left
mouse button.
■
fitting and replacing:<right mouse> Dragging and dropping
with the right mouse will fill a gap completely when dropped
into a gap between clips, or completely replace an existing clip
when dropped onto it.
■
Copy clips to the clipboard:<ctrl><c> Pressing these two keys
will copy the selected clip to the clipboard.
■
Paste clips from clipboard:<ctrl><v> Pressing these two keys
will paste the selected clip from the clipboard to the Editor
Track.