Service manual

Raider Mini 90 (single/double-seat): Service Manual Version：2.0 Feb. 2006

c) Measure the secondary coil resistance with the

spark plug cap in place.

Standard: 7-9 KΩ

4.3 Ignition Timing

The ignition advance is 15º± 1º B.T.D.C /1700rpm.

The Capacitive Discharge Ignition (CDI) system is factory pre-set and does not

require adjustment.

4.4 Starter Motor

z Remove

a) Remove the left crankcase cover;

Remove the snap ring from the follower gear of the electric starter;

b) Pull off the wire connector of the electric starter;

Remove the 3 bolts; remove the electric starter;

Remove the O-ring.

z Disassembly

a) Remove all the bolts;

b) Disassemble the electric starter.

NOTE: Assemble the starter back with the same amount of washers.

4.5 Battery

z Initial Service

z The following procedure is very dangerous and should be performed with

utmost care and attention. Wear protective eyewear, rubber gloves, and have

water available should electrolyte come in contact with skin or eyes.