Service manual

Raider-Classic 150 (Oil-cooled&Internal Gearbox): Service Manual (single/ double-seat) EEC Version;3.0 Feb..2005

c) Install the connecting piece, circlip and bottom plate.

d) Reverse the removal procedure for installation.

3.19.4 Driven Belt Pulley

 Removal

a) After removing the clutch friction plate, remove the guide pin, roller

and movable driven plate.

b) Remove the oil seal on the movable driven plate.

 Inspection

a) Measure the free length of the driven belt pulley spring.

Service limit 163.7mm

 When assembling the clutch and driven plate, you must use a clutch spring

compressor; otherwise it will damage the spring.

 No

rease on the driven

ulle