Service manual

Raider-Classic 150 (Oil-cooled&Internal Gearbox): Service Manual (single/ double-seat) EEC Version;3.0 Feb..2005
40
3.13.4 Carburetor Installation
Reverse the removal procedure for installation.
After installing, make sure that all carburetor linkages and cables are in correct position, and
the carburetor is in idle position.
3.14 Air Cut Valve (ACV)
3.14.1 General Information
The air cut valve can avoid some abnormity once the throttle closes too quickly; for example,
when the mixed gases are too thin.
The structure of the air cut valve is shown in the picture.
3.14.2 Removal
a) Remove the air inlet manifold of the air cut valve.
b) Remove the bolt, vacuum membrane cover, spring, and vacuum
membrane.
3.14.3 Installation
a) Assemble the vacuum membrane on the carburetor bolt.
b) Assemble the spring, vacuum member cover and lock bolt.