Owner`s manual

RE-1100cc Double-seat buggy Owner’s Manual Version: 3.0 Dec. 2006

[B] ENGINE OVERHEATING

You should stop and check the buggy when the water temperature gauge indicates high temperature. Run the

engine at idle speed for a few minutes then check whether the fan blade is running. If it is running and there is no

heating gas coming out from the engine, let the engine continue to run at idle speed until the engine is cooled.

If the temperature does not drop when the fan blade is running, then stop the engine for cooling. When the

engine is cooled, check the level of coolant. If the coolant level is low, check whether there is leakage at the water

tank, rubber tube or water pump. If leakage is discovered, do not run the engine anymore and call for repair services.

The heating-gas coming out from the engine could burn the skin. NEVER open water

tank cap when The heating gas is coming out. Stop the engine immediately for cooling

and stay away from the buggy.

You may open the water tank cap when the hot-gas disappears.